A detailed description of this product
| Models |
QU-H25X10BP |
| Brand |
/ |
| End cover material |
carbon steel galvanized/stainless steel/Nylon |
| Frame material |
carbon steel galvanized/stainless steel |
| Sealing material |
NBR rubber |
| Filter material |
fiberglass |
| The filtering precision is |
1μm;3μm;5μm;10μm;15μm;20μm;25μm; |
| Operating temperature |
-20-+100ºC |
| Application |
widely used |
The actual picture of the product
Packaging and transportation
Introduction to Filters
This filter is installed on the pressure pipeline of the hydraulic system to filter out mechanical impurities mixed in the hydraulic oil and gum, asphalt, carbon residue, etc. generated by the chemical changes of the hydraulic oil itself, in order to prevent valve core jamming, blockage of throttle hole gaps and damping holes, and rapid wear of hydraulic components.
The filtering effect is good and the accuracy is high. It is difficult to clean after a single blockage, and the filter element needs to be replaced.
This filter does not have a pressure difference signal device. When the filter element is contaminated and blocked to a pressure difference of 0.35Mpa at the inlet and outlet, a switch signal is issued. At this time, the filter element is replaced to protect system safety.
The filter element of this filter is made of glass fiber filter material, which has advantages such as high filtration accuracy, large oil flow capacity, small original pressure loss, and large pollutant capacity. Its filtration accuracy is calibrated with absolute filtration accuracy, and the filtration ratio β 3. 5, 10, 20 > 200, filtration efficiency n ≥ 99.5%, in accordance with ISO standards.
){kind=link}